The Importance of Colors of Underground Utility Lines
Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. Services in the area where the lines are located can experience interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.
Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.
With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. This has made it easier to locate utility lies underground and other important things. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.
Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.
Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.
If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.
Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.
Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
Orange lines are used for communication, alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Sewer and drain lines use the color green. You can derail any project for a long time if you hit these lines.
Click here now if you want to learn more about the color coding of utility lines. You can view here for more.
Recommended reference: important link